"عطر لمصابيح التحفيز "بورجوندي Ambientair Lacrosse Absolute Burgundy Lamp Fragrance

1. Choose a location for the lamp: a flat and stable surface, away from heat sources, and out of reach of children and/or pets.
2. Using a funnel, fill the lamp's body to 2/3 of its capacity with a liquid suitable for catalytic lamps. Remember, the liquid can be neutral or scented, and you can mix them for a milder aroma. After filling, clean any liquid residue from the lamp's body and surface.
3. Insert the burner and ensure its wick is in contact with the fragrance, and the stone is properly positioned above the metal base of the lamp. If this is the burner's first use, cover the stone with a cap (otherwise the fragrance will evaporate) and allow the wick to soak for 20 minutes.
4. Remove the cap and light the burner with a lighter, allowing the flame to burn for two minutes. You should see a flame approximately 7 to 10 cm (3 to 4 inches) high, which will reduce when using the burner. Do not leave the lamp unattended during these two minutes and never touch the stone during this process.
5. Blow out the flame, and once it's extinguished, cover the stone with the protective crown. The stone will be hot, so do not touch it: your lamp is now operating.
6. Allow the lamp to cleanse the atmosphere and purify the air for about 20 minutes in an area of approximately 10 square meters.
7. To stop the operation, carefully remove the crown, as it may be somewhat warm, and cover the hot stone with the metal cap to prevent further burning and the evaporation of the fragrance from the lamp's body.
8. To store it for next use, leave the cap and crown on the metal base of the body, so everything is ready for the next use.