"عطر للمصابيح الحفازة "التوبيروزا Ambientair Lacrosse Tuberose Bloom Lamp Fragrance

1. Choose a location for your lamp: a flat and stable surface, away from heat sources, and out of reach of children and pets.

2. Using a funnel, fill the lamp's body to two-thirds of its capacity with a liquid suitable for catalytic lamps. The liquid can be neutral or scented, and you can mix them to achieve a milder fragrance. After filling, wipe any excess liquid off the lamp and its surface.

3. Insert the burner, ensuring the wick is in contact with the liquid, and the stone is properly placed above the metal base. If this is the first time using the burner, cover the stone with the cap to prevent the fragrance from evaporating, and let the wick soak for 20 minutes.

4. Remove the cap and light the burner with a lighter, leaving the flame for two minutes. Wait for the flame to reach about 7 to 10 cm (3 to 4 inches), which will reduce when the burner is in use. Do not leave the lamp unattended during these two minutes and never touch the stone during this process.

5. Blow out the flame, and once it is extinguished, cover the stone with the protective crown. The stone will be hot, so do not touch it: your lamp is now working.

6. Allow the lamp to purify and freshen the air for about 20 minutes in an area of approximately 10 square meters.

7. To stop the lamp, carefully remove the protective crown, as it may be warm, and cover the hot stone with the metal cap to prevent further burning and fragrance evaporation.

8. For storage until the next use, leave the cap and protective crown on the metal base of the lamp, so everything is ready for the next time.