مسحوق أكريليك مموه، 30 جم Tufi Profi Premium Acrylic Powder

1. Start by preparing the nail plate. Shape the nails as desired by performing either a hardware or a clipped manicure, and thoroughly clean off any dust. You can use a manicure set or a nail drill for this step.
2. Buff the nail surface to remove the top layer.
3. Apply a primer to the nail to ensure better adhesion of the base coat to the natural nail. Once the primer is dry (after about 1 minute), apply a thin layer of the base coat. Cure the nails in a UV lamp (36W) for 2 minutes or in an LED lamp for 30-60 seconds.
4. Next, apply the gel polish in the desired color. Depending on the opacity, you may need one or two coats. Apply each coat thinly to prevent deformation of the gel polish. Cure each layer in the lamp after application. After curing the final color layer, apply an additional layer of gel polish without curing it in the lamp.
5. For the final step, apply acrylic powder over the uncured gel polish. Cure the nails in the lamp again. Use a nail brush to remove any excess acrylic powder. Finally, remove the sticky layer with a special solution.