جل كاموفلاج للأظافر Adore Professional Cover Gel

1. Degrease the nail plate mechanically (using a buffer/file) and/or chemically (with NAIL PREP and a lint-free wipe).

2. Apply either ACID PRIMER or the acid-free ULTRABOND, depending on the type of nail plate.

3. For damaged or moist nail plates, use MULTI BASE as the base coat. Apply MULTI BASE with rubbing motions and cure in an LED lamp for 30 seconds or a UV lamp for 2 minutes, leaving a sticky layer.

4. Prepare and install forms on each finger sequentially. Apply a thin base layer of the desired length and shape directly onto the lower or upper form. Shape the nail architecture with gel. To create an arch, you can pinch the gel at 7-12 seconds, depending on the type and power of the lamp. Then, cure the nail in the lamp for full gel polymerization: 60 seconds in an LED lamp or 3-4 minutes in a UV lamp.

5. Remove the residual stickiness using NAIL PREP.

6. Gradually file the nail to achieve the desired shape.

7. Seal the coating with a top coat, covering the free edge of the nail. If needed, perform leveling. Cure in a UV lamp for 2-3 minutes, or in an LED lamp for 1 minute.