"عطر للمبخرات الحرارية "خشب الصندل والبرغموت Ambientair Lacrosse Sandalwood & Bergamot Lamp Fragrance

1. Choose a location for the lamp: a flat, stable surface away from heat sources and out of reach of children and pets.
2. Using a funnel, fill the lamp body to two-thirds of its volume with a liquid suitable for catalytic lamps. The liquid can be neutral or scented, and you can mix them to achieve a milder scent. After filling, clean any excess liquid from the lamp body and surface.
3. Insert the burner, ensuring its wick is in contact with the liquid and that the stone is properly positioned above the metal base. If this is the first time using the burner, cover the stone with its cap (to prevent evaporation) and let the wick soak for 20 minutes.
4. Remove the cap and light the burner using a lighter, letting the flame burn for two minutes. The flame should be about 7-10 cm (3-4 inches) high initially and will reduce in size with the burner in use. Do not leave the lamp unattended during these two minutes, and never touch the stone while it is burning.
5. Blow out the flame and, once it is extinguished, cover the stone with the protective crown. The stone will be hot, so avoid touching it: your lamp is now operational.
6. Allow the lamp to purify the air for about 20 minutes in a room of approximately 10 square meters.
7. To stop the lamp, carefully remove the crown, as it may be warm, and cover the hot stone with the metal cap to stop the burning and prevent further evaporation of the fragrance.
8. For future use, leave the cap and crown on the metal base so everything is ready for the next time.