بودرة عاكسة للأظافر Adore Professional Mirror Chrome Powder

1. Degrease the nail surface either mechanically (using a buffer) and/or chemically (using NAIL PREP and a lint-free wipe).

2. If using a low-acidity base, apply Ultrabond non-acid primer to enhance adhesion.

3. Apply a base coat, covering the edge of the nail. If necessary, even out the nail surface. Cure the base coat under a UV lamp for 2-3 minutes or an LED lamp for 30-60 seconds.

4. Apply gel polish, carefully covering the free edge. Apply a second layer for a more saturated color. Cure each layer under a UV lamp for 2 minutes or an LED lamp for 30 seconds.

5. Seal the color with a no-wipe top coat, covering the edge of the nail. Cure under a UV lamp for 1-2 minutes or an LED lamp for 30 seconds. Do not over-cure the top coat!

6. Using an applicator or your fingertip, evenly rub in the powder until the nail surface is fully covered and the mirror effect is achieved.

7. Remove any excess powder from the nail surface using a soft natural-bristle brush, and buff the nail again to restore shine.

8. Treat the nail edges with Ultrabond non-acid primer. Remove excess primer from the brush and carefully seal the edges.

9. Secure any metallic designs with a medium layer of sticky top coat or a thin layer of Rubber Base, followed by a no-wipe top coat.